Yi Wu de rui ao tai Trading Firm

Products

WIC-1SHDSL

WIC-1SHDSL

Product name:WIC-1SHDSL

Item:CISCO

←[Previous:CISCO] [Next:CISCO]→

Details:
 WIC-1SHDSL
 
 
Technical Information
Application/Usage:     Wide Area Network
Interfaces/Ports
Interfaces/Ports:     1 x G.SHDSL WAN
Interfaces/Ports Details:     1 x RJ-11 G.SHDSL WAN
Media & Performance
Connectivity Media:     Cable
Controls/Indicators
Status Indicators:     
CD (Carrier Detect)
LP (Loopback)
OK (DSLSAR download complete)
Physical Characteristics
Dimensions:     0.8" Height x 3.1" Width x 4.4" Depth
Weight (Approximate):     2.40 oz
Miscellaneous
Additional Information:     
RJ-11 line cord (included) 
 
Modular Router Solutions:
DSL Access
ATM Edge Connectivity
DCN (Data Communications Network)
TDM/Drop&Insert
VPN & Firewall Solutions 
 
The Cisco 1700 combined with the WIC-1SHDSL provides:
Symmetrical WAN speeds (up to 2.3 Mbps) over a single copper pair
Multiple G.shdsl WICs per Cisco 1700 chassis
Support for voice over IP (VoIP) over DSL with IP quality of service (QoS)
Support for IP QoS map to ATM class of service (CoS)
Back-to-back operation or operation via DSL access multiplexer (DSLAM)
Support for up to 23 virtual circuits per WIC 
 
Longer Reach Than Other DSL Technologies:
Provides 2.3 Mbps at up to 11,000 feet on 26 AWG (subject to line conditions)
Operates at distances up to 22,000 feet
Repeatable for even greater distances
Spectral "friendly" technology gives less interference with other transmission 
 
technologies 
 
Voice Support:
Support for VoIP over DSL with QoS using H.323 signaling 
 
Cisco IOS Software and Platform Support:
First supported in Cisco IOS Software Release 12.2(4)XL
Functions in built-in VIC/WIC slots 
 
Country Support:
Complies with ITU G.991.2 standard
Worldwide-accepted technology
System Requirements:     Processor Requirements:
The MPC 860 microprocessor (revision B5 or later) is required for using the WIC-
 
1SHDSL card.
 
Software Requirements:
The WIC-1SHDSL card requires Cisco IOS Release 12.2(4)XL or later. 
 
Memory Requirements:
16 MB of Flash memory
64 MB of dynamic RAM (DRAM)
Compatibility:     
Cisco 1700 Series
Cisco 2600 Series
Cisco 3600 Series
Cisco 3700 Series
Cisco G.SHDSL line card in the Cisco 6015, Cisco 6130, Cisco 6160, or Cisco 6260 
 
digital subscriber line access multiplexer (DSLAM)
Certifications & Standards:     Standards:
ITU-T G.991.2 (SHDSL)
Scalability:     Scalable Bandwidth:
Delivers from 192 kbps to 2.3 Mbps bandwidth (symmetrical)
Rate adaptable using G.hs (handshake) - automatically selects optimal speed setting
Warranty
Limited Warranty:     90 day

Related Products :
VWIC2-2MFT-G703
CISCO
VWIC2-2MFT-G703
VWIC-1MFT-E1
CISCO
VWIC-1MFT-E1
WIC-1B-S/T-V3
CISCO
WIC-1B-S/T-V3
VWIC-1MFT-G703
CISCO
VWIC-1MFT-G703
WIC-1B-U
CISCO
WIC-1B-U
VWIC-2MFT-E1
CISCO
VWIC-2MFT-E1
VWIC-2MFT-E1-DI
CISCO
VWIC-2MFT-E1-DI
WIC-1AM-V2
CISCO
WIC-1AM-V2
Home | Products | Service | Contact Us | GET A QUOTE | About Us | Navigation | Sitemap
Copyright (c) Yi Wu de rui ao tai Trading Firm All Rights Reserved