Yi Wu de rui ao tai Trading Firm
Products Category
News Center
Contact Us
E-mail: info@siutel.com
Add: Room 203,No.2 Unit,No.36 Building,South Qingkou District, Jiangdong St, Yiwu City, Jinhua City, Zhejiang Province, P.R.China
Products
VWIC-2MFT-E1 |
|
|
|
Product name：VWIC-2MFT-E1 |
|
Item：CISCO |
|
 |
←[Previous：CISCO] [Next：CISCO]→ |
Details： |
|
VWIC-2MFT-E1
Technical Information
Application/Usage: Voice
Interfaces/Ports
Interfaces/Ports: 2 x E1 WAN
Interfaces/Ports Details: 2 x RJ-48 E1 WAN
Media & Performance
Data Transfer Rate: 2.05 Mbps E1
Management & Protocols
Management:
Telnet/Console:
Remote and local configuration, monitoring, and troubleshooting from Cisco IOS
Command Line Interface
SNMP:
Router and DSU/CSU managed by single SNMP agent;router/DSU/CSU appear as
single network entity to user
SNMP Traps:
Generated in response to alarms
Controls/Indicators
Status Indicators:
LEDs
CD (Data Carrier Detect)
LP (loopback)
AL (Alarm)
Physical Characteristics
Dimensions: 0.8" Height x 3.1" Width x 4.8" Depth
Weight (Approximate): 1.92 oz Minimum
Weight (Approximate): 2.88 oz Maximum
Miscellaneous
Additional Information:
Transmit Bit Rate:
2.048 Mbps +/- 100 bps/50 PPM
Receive Bit Rate:
2.048 Mbps +/- 100 bps/50 PPM
Data Rate:
1.984 Mbps (framed mode) Per E1 Port
Clocking:
Internal and Loop (recovered from network)
E1 National Bits:
Fixed (non-configurable)
Encoding:
HDB3
DTE Interface (WIC mode):
Fractional Service
DTE Interface (VIC mode):
G.704/structured
DCE Interface:
G.704/structured
Data Support "WIC mode"
Voice Support "VIC Mode"
2 Channel Groups on One Port
Management and Diagnostics
LAN-to-LAN Routing
Voice & Fax Integration
VPN & Firewall Solutions
System Requirements:
2 channel groups on one port requires Cisco IOS 12.1(1)T or later on the Cisco 2600.
It requires 12.1(2)X, 12.1(3)T (Summer 2000) or later releases on Cisco 3620, 3640,
and 3660.
2 channel groups on one port supported in Cisco 2600 chassis WIC slots. Not
supported on NM-1E2W, NM-2E2W, or NM-1E1R2W. Supported on NM-1FE2W, NM-
2FE2W, NM-1E1R2W, and NM-2W.
When the 2 channel group mode is enabled only one physical port is supported by the
WIC slot. Add/Drop multiplexing is still supported in this mode since only one port
terminates on the router.
BERT support requires Cisco IOS 12.1(1)T or later releases.
V.54 loopback requires Cisco IOS 12.1(1)T or later releases.
T1 ESF and SF remote loopback initiation and detection requires Cisco IOS 12.1(2)X,
12.1(3)T (Summer 2000) or later releases.
Compatibility:
Supported Platforms & Minimum IOS Versions:
3745 - 12.2(8)T
3725 - 12.2(8)T
3660 series - 12.0(7)XK
3640 - 12.0(7)XK
3620 - 12.0(7)XK
2691 - 12.2(8)T1
2600XM Series - 12.2(8)T1
2600 series - 12.0(5)XK
1760 - 12.2(4)YB
1751 - 12.2(4)YB
1721 - 12.2(8)YJ
Warranty
Limited Warranty: 90 day |
|
| Related Products : |
|
|
|
|
||||||||
|
|
|
|
Copyright (c) Yi Wu de rui ao tai Trading Firm All Rights Reserved