Yi Wu de rui ao tai Trading Firm

Products

VWIC-2MFT-T1

VWIC-2MFT-T1

Product name:VWIC-2MFT-T1

Item:CISCO

←[Previous:CISCO] [Next:CISCO]→

Details:
 VWIC-2MFT-T1
 
Technical Information
Application/Usage:     Voice
Interfaces/Ports
Interfaces/Ports:     2 x T1/FT1 WAN
Interfaces/Ports Details:     2 x RJ-48 T1/FT1 WAN
Media & Performance
Connectivity Media:     Cable
Data Transfer Rate:     1.54 Mbps T1
Management & Protocols
Management:     Telnet/Console:
Remote and local configuration, monitoring, and troubleshooting from Cisco IOS 
 
Command Line Interface 
 
SNMP:
Router and DSU/CSU managed by single SNMP agent; router/DSU/CSU appear as 
 
single network entity to user
Standard MIB (MIB II)
Cisco integrated DSU/CSU MIB
RFC 1406 T1 MIB, including alarm detection and reporting 
 
SNMP Traps:
Generated in response to alarms
Protocols:     VoIP
Protocols:     VoFR
Protocols:     VoATM
Controls/Indicators
Status Indicators:     
CD (Data Carrier Detect)
LP (loopback)
AL (Alarm)
Environmental Conditions
Temperature:     32�F (0�C) to 104�F (40�C) Operating
Temperature:     -13�F (-25�C) to 158�F (70�C) Storage
Humidity:     5% to 85% Non-condensing Relative Humidity Operating
Humidity:     5% to 95% Non-condensing Relative Humidity Storage
Physical Characteristics
Dimensions:     0.8" Height x 3.1" Width x 4.8" Depth
Weight (Approximate):     1.92 oz to 2.88 oz
Miscellaneous
Additional Information:     Modular Router Solutions:
LAN-to-LAN Routing
Voice & Fax Integration
VPN & Firewall Solutions 
 
Packet Voice Support:
The 2-port T1 Multiflex VWIC or 2-port Drop and Insert T1 Multiflex VWIC connect 1 to 
 
48 DS0 channels (voice calls) to the Digital T1/E1 Packet Voice Trunk Module 
 
Data Features:
T1/E1 or fractional T1/E1 network interface
N X 64 Kbps or N X 56 Kbps, nonchannelized data rates (T1:N=1 to 24, E1:n=1 to 31)
Standards based, including ANSI T1.403 and AT&T Publication 62411 
 
T1 Network Interface:
Transmit Bit Rate: 1.544 Mbps +/- 50 bps/32 PPM
Receive Bit Rate: 1.544 Mbps +/- 50 bps/32 PPM
Line Code: AMI, B8ZS
AMI Ones Density: Enforced for N x 56 Kbps channels
Framing Format: D4 (SF) and ESF
Output level (LBO): 0, -7.5, or -15 dB
Input Level: +1dB0 down to -24 dB0
DTE Interface (WIC mode): Fractional Service
DTE Interface (VIC mode): G.704/structured
DCE Interface: G.704/structured 
 
DSU/CSU:
Selectable DSX-1 cable length in increments from 0 to 655 feet in DSU mode)
Selectable DS1 CSU line build-out: 0, -7.5, -15, and -22.5 dB
Selectable DS1 CSU receiver gain: 26 or 36 dB 
 
Comments:
VIC support in the Cisco 2600, 3620, 3640 and 3660 when used with a Cisco T1/E1 
 
Packet Voice Trunk Module (NM-HDV-1T1-24, NM-HDV-1T1-24E, and NM-HDV-2T1-
 
48). WIC support in the Cisco 2600 expansion slot. Future WIC support will be 
 
provided in the Cisco 3620, 3640 and 3660.
Compatibility:     Supported Platforms & Minimum IOS Versions:
3745 - 12.2(8)T
3725 - 12.2(8)T
3660 series - 12.0(5)XK
3640 - 12.0(7)XK
3620 - 12.0(7)XK
2691 - 12.2(8)T1
2650 - 12.1(3)T
2600XM Series - 12.2(8)T1
2600 series - 12.0(5)XK
1720 - Not Supported
1600 series - Not Supported
Certifications & Standards:     T1 Compliance (Partial List):
ANSI T1.403
US (UL 1950, T1)
FCC Part 68
CS-03
Canada (CSA 950, T1)
US (FCC Part 15 Class B, T1)
U.K. (BS6301, EN60950, EN41003)
Canada (CSA C108.8 Class A, T1)
Bellcore-AT&T Accunet (62411)
ATT 54016
Japan (VCCI Class 2, VCCI:V-3/97.04, T1, JATE Green Book, IEC950)
Warranty
Limited Warranty:     90 day

Related Products :
VWIC2-1MFT-G703
CISCO
VWIC2-1MFT-G703
WIC-2A/S
CISCO
WIC-2A/S
VWIC2-2MFT-G703
CISCO
VWIC2-2MFT-G703
WIC-1B-S/T-V3
CISCO
WIC-1B-S/T-V3
WIC-1B-U
CISCO
WIC-1B-U
WIC-1SHDSL
CISCO
WIC-1SHDSL
WIC-1AM-V2
CISCO
WIC-1AM-V2
WIC-2AM-V2
CISCO
WIC-2AM-V2
Home | Products | Service | Contact Us | GET A QUOTE | About Us | Navigation | Sitemap
Copyright (c) Yi Wu de rui ao tai Trading Firm All Rights Reserved