Yi Wu de rui ao tai Trading Firm
Products Category
News Center
Contact Us
E-mail: info@siutel.com
Add: Room 203,No.2 Unit,No.36 Building,South Qingkou District, Jiangdong St, Yiwu City, Jinhua City, Zhejiang Province, P.R.China
Products
WS-C2960-24TT-L |
|
|
|
Product name：WS-C2960-24TT-L |
|
Item：CISCO |
|
 |
←[Previous：CISCO] [Next：CISCO]→ |
Details： |
|
Interfaces/Ports
Total Number of Network Ports: 24
Uplink Port: Yes
Number of Network (RJ-45) Ports: 24
Port/Expansion Slot Details: 24 x Fast Ethernet Network
Port/Expansion Slot Details: 2 x Gigabit Ethernet Uplink
Media & Performance
Media Type Supported: Twisted Pair
Twisted Pair Cable Standard: Category 5
Ethernet Technology: Fast Ethernet
Network Technology: 10Base-T
Network Technology: 10/100/1000Base-T
Network & Communication
Layer Supported: 2
Management & Protocols
Manageable: Yes
Management:
Cisco Network Assistant
CiscoWorks Support
Device manager
Cisco Express Setup
CiscoView application
Cisco Network Assistant Software
Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location
Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches
Cisco IOS CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches
Cisco Service Assurance Agent (SAA) support facilitates service-level management throughout the LAN
Switching Database Manager templates for security and QoS allow administrators to easily adjust memory allocation to the desired features based on deployment-specific requirements
VLAN trunks can be created from any port using standards-based 802.1q tagging
Up to 255 VLANs per switch or stack and up to 128 spanning-tree instances per switch are supported.
Four thousand VLAN IDs are supported
Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting
Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches
SNMP v1, v2c, and v3 and Telnet interface support delivers comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management
Cisco Discovery Protocol Versions 1 and 2 help enable a CiscoWorks network-management station for automatic switch discovery
Power Description
Input Voltage: 110 V AC
Input Voltage: 220 V AC
Power Source: Power Supply
Redundant Power Supply: Yes
Physical Characteristics
Height: 1.7"
Width: 17.5"
Depth: 9.3"
Weight (Approximate): 8.00 lb
Miscellaneous
Package Contents:
Catalyst 2960-24TT Ethernet Switch
Catalyst 2960 Switch Getting Started Guide
Regulatory Compliance and Safety Information for the Catalyst 2960 Switch
AC power cord
One RJ-45-to-DB-9 adapter cable
Mounting kit containing
Four rubber feet for mounting the switch on a table
Two 19-inch rack-mounting brackets (also used for wall mounting)
Six Phillips flat-head screws for attaching the brackets to the switch
Four Phillips machine screws for attaching the brackets to a rack
One cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets
One Redundant Power System (RPS) connector cover (for wall mounting)
Two Phillips pan-head screws (for attaching the RPS cover)
Four Phillips truss-head screws (for wall-mounting brackets)
Additional Information:
64 MB DRAM
32 MB flash memory
LAN Base Image installed
Configurable up to 8000 MAC addresses
Configurable up to 255 IGMP groups
Cisco Catalyst 2960-24TT: 282,416 hr
Superior Redundancy for Fault Backup
Integrated Cisco IOS Software Features for Bandwidth Optimization
Advanced QoS
Granular Rate Limiting
Networkwide Security Features
Warranty
Limited Warranty: 90 Day
|
|
| Related Products : |
|
|
|
|
||||||||
|
|
|
|
Copyright (c) Yi Wu de rui ao tai Trading Firm All Rights Reserved